Drylining Gillingham
Heritage, Commercial & Residential Specialists

Dry lining is a method of finishing internal walls and ceilings with pre-formed plasterboard sheets rather than applying several coats of wet plaster to the masonry. Plasterboard is fixed either directly to brick or blockwork with dabs of drywall adhesive (the dot-and-dab method), or screwed to a timber or metal stud frame that is itself independent of the wall. Joints and screw heads are sealed with scrim tape and jointing compound, producing a flat surface that can be decorated directly or finished with a thin plaster skim. In Gillingham, dry lining is the standard approach for new-build apartments at Gillingham, commercial fit-outs in Gillingham, the Victorian terraces in Gillingham Town Centre, Luton and Grange, and post-war semis in Luton, Rainham, Twydall, Parkwood and Wigmore. The service cavity behind the board is used to run electrical cables, plumbing, ventilation, and insulation. British Standard BS 8212 governs drylining and partitioning in the UK, and plasterboard itself is manufactured to BS EN 520. We install to these standards on every Gillingham project.

Dry lining costs in Gillingham for September 2026 are typically: - Standard 12.5mm plasterboard (dot-and-dab to blockwork): £25 - £42 per m² - Tape-and-joint finish on standard board: £7 - £11 per m² - Full plaster skim over plasterboard: £7 - £11 per m² - Moisture-resistant or fire-rated board upgrade: +£5 - £9 per m² - Insulated plasterboard (PIR, 50-80mm): £38 - £60 per m² - Acoustic dry lining system: £45 - £72 per m² - Suspended ceiling (MF plasterboard): £28 - £50 per m² - Metal stud partition (single layer, per linear metre): £55 - £100 per m - Metal stud partition (double layer, acoustic/fire): £78 - £135 per m Gillingham prices sit roughly 5-15% above the UK national average because labour day rates in Kent (£200 - £280) are higher than the national average. Material costs are largely consistent across the UK. For a Gillingham three-bed terrace, expect £4,000 - £8,500 over 1-2 weeks. Commercial 500-1,000 m² fit-outs typically range £18,000 - £45,000 over 2-4 weeks. Every project is unique — request a free, itemised quote.

For most projects, yes. Dry lining is typically 30-50% cheaper than traditional wet plastering in Gillingham, both in direct labour and in drying-time cost (no waiting days for plaster to dry before painting). Where traditional plastering is still the right choice: small repair jobs, complex curves, listed buildings where breathable lime plaster is required, and where a premium seamless finish is needed (e.g. high-end residential or heritage restoration in Luton, Grange, and the Gillingham Conservation Area). A wet-plaster skim coat over plasterboard in Gillingham adds about £7 - £11 per m² over tape-and-joint. Dot-and-dab drylining plus skim often lands at a similar total price to two-coat wet plastering, but finishes in a fraction of the time and avoids the 4-7 day drying window.

Typical Gillingham installation times for September 2026: - Single room (walls + ceiling, ~12-20 m²): 2-3 days install + 1-2 days jointing/skim - Three-bed terrace (whole house, ~80-120 m² wall area): 5-8 working days - Gillingham apartment (full re-line, 60-80 m²): 4-6 days - Commercial office fit-out (200 m²): 1-2 weeks - Large commercial (500-1,000 m²): 2-4 weeks - HMO conversion (4-6 bed): 1-2 weeks Programme depends on access (lift availability in Gillingham tower blocks can be a constraint), plasterboard delivery (next-day from Travis Perkins Medway or CCF Medway), and any required electrical/plumbing first-fix. We provide a written programme with every quote.

Not always. There are four recognised levels of plasterboard finish under BS 8212: - Level 0 - Unfinished (no jointing) - Level 1 - Joints tape-and-bedded only (typical behind tiles) - Level 2 - Joints filled, no finish on board face - Level 3 - Tapered-edge boards tape-and-jointed, ready for textured paint - Level 4 - Taped-and-jointed or skimmed, ready for flat emulsion - Level 5 - Premium full skim, defect-free surface for gloss or critical lighting Most Gillingham residential work lands at Level 4 — either tape-and-jointed with a quality jointing compound, or skimmed with a 2-3mm plaster skim. Commercial fit-outs in Gillingham and the office parks around Gillingham often use a full skim for the cleanest visual under office LED lighting. Skim adds £7 - £11 per m² in Gillingham but eliminates any visible board joint telegraphing through paint.